In case your Alt. Identifying whether the problem is with the Alt is crucial if vapor isn't being produced. Alt. or pod. device.The first step is to check the light on your Alt. When you drag the device.If the light still works, follow these steps:

 Replace the current Alt with a new one. Substitute another pod. There may be a problem with the original pod if the device functions properly with the new pod.

In case of a malfunctioning light: - Charge your device completely.Inspect the area inside the Alt next. The device on which the Alt is located.

Insert the pod: Ensure that no obstructions can interfere with the contact making a proper connection. Clean both bronze contacts on the Alt if the connection area appears clear. It is the device and the pod. Ensure proper contact and cleanliness by using isopropyl alcohol and a cotton bud.

You can troubleshoot and potentially resolve any issues you may have with your Alt by following these steps. Adapter. Have fun while you vape!

Charging your alt requires a 0.5 amp charger. In case you don't have one, you can purchase one here.

Chargers that deliver high amps can damage the charging components in the device, causing the device to stop working.   This is the light on the alt. Whenever the alt is turned on, it illuminates. is on charge and extinguishes when the alt. is fully charged.

alt. A pod can leak due to rough handling in transit, exposure to sunlight or other heat sources, condensation buildup in the airflow tube, and other instances. Leakage is generally not a sign of a fault with the pod and can usually be repaired quite easily.By gently tapping the airflow tube on the side of the pod, you can drain out leaking liquid by tilting the pod sideways.

As soon as the airflow chamber has been cleared of excess liquid, the alternator will start. There will be no changes to pod functionality.

In the event that you have difficulty drawing from your alt. In this case, you should start by checking the alt's base. Inside the alt and the pod. Device where the pod is inserted into the device. If any foreign material gets caught on the base of the pod or into the device, check for obstructions.

You have liquid inside your sealed alt. Pod packs are often damaged during transit because of mishandling. The alt has been crushed. A pod pack can cause liquid to seep into the packaging. To prevent this, simply clean the alt. Use a paper towel to wipe the pod.

The alt needs to be checked. The airflow chamber contains a pod for liquid. If there is liquid inside the airflow chamber, gently tap it out. Here is the alternative. As a result, pod should now function normally.